PAGE TOP

POWER DRIVE for SUZUKI

Power boost by easy installation for SWIFT SPORT !

Swift Sport

PDX-S2 Swift Sport

Swift Sport

PDX-S2 Swift Sport

Swift Sport

PDX-S2 Swift Sport

PDX-S2

 

  • thumbsnail
  • thumbsnail
  • thumbsnail
  • thumbsnail
PDX-S2 product image

POWER DRIVE for SUZUKI

For SUZUKI Swift Sport NEW

PDX-S2 ¥38,000



Compatibility List

Model Name Model Year Model Type Engine Type
Swift Sport 2017 / 9- ZC33S K14C

POWER DRIVE PV

Features

Because PDX-S2 is a control system based on results from actual testing of SWIFT SPORT, you are ensured real power that suits your needs.

Performance Boost
PDX-S2Car Model: Swift Sport (ZC33S) MT
POWER
(PS)
TORQUE
(kgm)
0-100km/h
(sec)
BOOST
(kPa)
Normal 134 24.7 8.2 105
Level 2 143 25.4 115
Level 5 147 25.7
Level 7 153 26.5 7.3 125
Level 9 154 25.8
Performance Boost

Note: The results shown here are from actual tests carried out by PIVOT and may differ from condition of the car.

Level Adjustment

The boost pressure can be adjusted in 9 steps to meet your needs whether driving in the city or racing.

Simple Coupler Connection

Simple coupler connection within the engine room means easy trouble-free installation.

Compatible with 3-drive series

This product can be installed with 3-drive series.

Power Boost with Safety Range

Besides offering boost up within your cars fuel control range and adjusting for boost during startup and low water temperature, if the product should fail it will automatically return to normal boost levels to ensure safety while driving.

Waterproof Drainage Design

The circuit board is protected by a double layer waterproof coating and the sealed case is designed to drain away water and protect from high pressure water and condensation; ensuring long worry-free usage.

Easy Installation with Thin Compact Unit

Thin Compact unit Installation is made easy by fixing the unit with double-sided tape or zip ties. Note: Do not install in areas prone to strong engine vibration or extreme heat.

No Repair or Inspection Necessary

As this product makes no alterations to the ECU, it has no impact on inspection, repair or ECU version upgrades.

Wiring

PDX-S2 Wiring

Size

Unit (unit : mm)

Unit 90×70×20mm

Caution

  1. 1. Before purchasing make sure to check the Compatibility List.
  2. 2. This product can not be installed in cars which use the different ECU from the standard or use a sub-computer.
  3. 3. This product can be installed with 3-drive series.
  4. 4. Cannot be displayed exact value on Boost meter using Diagnostic Monitoring Connector.
  5. 5. Please carefully read the User's manual and carry out all operations with the utmost in safety.