New Controller provides needle action quick and smooth.

Switch between RPM and Water Temp in the same unit.

Upon exceeding the set Shift Point (RPM) the lamp begins to blink.

Save and display peak reading (only Water Temp).

CAN Data Transmission Models (For details, see the Fitting List.)

Please read the following before purchasing.

※1 See here for more about using in conjunction with other OBD2 connected products.
※2 The display will not work properly and hence is incompatible if either of the following is the case:
　　1. The ECU is different from the standard for that model.
　　2. If a sub-computer is being used.
※3 Due to the ECU information received, the displayed values on this product may differ from those of standard or other meters.
※4 By disconnecting the minus battery cable terminal or the connector it is possible to erase all peak readings.