3-drive · REMOTE Discontinued Product
Throttle Controller with Remote Control Auto-Cruise
Information
Actual size pattern paper
Please use in consideration of the mounting location.
Download (PDF in Japanese)
Features
AUTO CRUISE Increased Handleability and Comfort
AUTO CRUISE
Cruise automatically at set speed (30–140km/h).
REMOTE SWITCH
Switch can be installed to the wiper lever, near the shift lever or any other easy to operate position using double-sided tape.
End of Wiper Lever
Use supplied Top Spacer for installing to a curved surface.
Side of Wiper Lever
Use supplied Lever Spacer for installing to a curved surface.
Near Shift Lever
Near Standard Switches
Remote Control
Use switch to remotely control all Auto Cruise operations.
Stable and Safe Remote Control
Performance data of AUTO CRUISE
Throttle Controller with Response Mode
RESPONSE MODE
(5 Levels) Increased response to low and mid range acceleration to near that of wired characteristics.
SPORTS MODE
(7 Levels) Increased response across all ranges of acceleration is best for Sports driving.
ECO MODE
(5 Levels) Reduced response to low and mid range acceleration for eco-driving
NORMAL
Standard performance.
Performance data of Throttle Controller
Wiring
- *2 The car specific harness makes connection to the electronic accelerator a snap; for those already using a 3-drive Series the product can be used as is.
- *3 By wiring to reverse, it is possible when in SPORTS or RESPONSE Mode to automatically switch to NORMAL Mode when the gear is put into Reverse.
Size
Controller / Switch / Unit (Unit : mm)
Sold Separately
TH
Specialized Harness
Necessary.
Compatibility list
BR
Brake Harness
Not necessary if wiring directly.
Compatibility list
MTC
MT Clutch Harness
Not necessary if wiring directly.
Compatibility list
THA-MA
MT Clutch Adaptor
Deactivate Auto-Cruise from the clutch. (Only where necessary)
Compatibility list
Caution
- 1. This product is designed only for electronic throttle car models.
- 2. Before purchasing make sure to check the "Compatibility list".
- 3. This product can not be installed in car models which come with standard auto-cruise control.
- 4. Make sure to use the 3-drive harness.
- 5. Please carefully read the "User's manual" and carry out all operations with the utmost in safety.
- 6. Make sure to carry out "Initial Settings" before using the product.
- 7. If the standard brake light bulb has been replaced by a non-standard LED bulb and the AUTO CRUISE function does not work properly, please re-insert a standard bulb.
- 8. Do not remodeling this product. It may cause damage not only to the product, but to the car and the operation of the car in which it is installed.