Simply connect to the diagnostic monitoring connector! One Unit Multi-data Display X2 Series now compatible with CAN Data Transmission.
Water temperature is a good signal of overheating, loss of power and other engine malfunctions; knowing it helps you maintain the optimum driving condition. Get in the know for a better ride.
A 20°C rise in intake temperature results in a 12ps* loss of power; essential information when driving with speed and power is important. Get in the know for a better ride.
* This calculation uses the air density of a car with an engine power of 200ps; actual figures may be different.
New Controller provides needle action quick and smooth.
Switch between Water Temp and Intake-air Temp in the same unit.
Save and display peak reading.
CAN Data Transmission Models (For details, see the Fitting List.)
No need for hassling with pipes and wires
※1 See here for more about using in conjunction with other OBD2 connected products.
※2 The display will not work properly and hence is incompatible if either of the following is the case:
1. The ECU is different from the standard for that model.
2. If a sub-computer is being used.
※3 Due to the ECU information received, the displayed values on this product may differ from those of standard or other meters.
※4 By disconnecting the minus battery cable terminal or the connector it is possible to erase all peak readings.